Garden curb installation manual
GIDROLICA® LINE GARDEN CURB is a plastic curb that allows to mark and highlight different styles and zones in the garden plot.

GIDROLICA® LINE GARDEN CURB is a plastic curb that allows to mark and highlight different styles and zones in the garden plot.
It is applied for bordering and separation of flowerbeds, lawns, paths and seedbeds and it considerably improves the landscape design of small holdings.
-
1. Preparation
Before the beginning of curb installation seal the soil with the help of special garden roller or other expedients: old barrel, big even log, board.
! Please, note that the sealed surface must be even.
-
2. Selection of shape
Determine the future shape of the zones separated by applying marking on the soil. To make bent lines cut plastic rib stiffeners with the help of plyers, scissors or knife and bend the board in any direction.
-
3. Installation
The curb should be attached with plastic anchors or steel nails. To straight line – with the help of 3-4 anchors, to bent line – 5-6. Frequency of curb fixing depends on the soil type, clay soil needs less anchors, pervious soil - more.
-
1. Final stage
Fill the separated zones with the prepared styles up to the plastic curb height or lay the curb plate down.

